BIG BOY: ON THE ROAD TO RESTORATION
Complete coverage, photos, and more! Go now »
Trains Big Boy
ABC's of Railroading
E-mail Article to a FriendPrint ArticleBookmark and Share

Glossary of railroad signal terms

Published: May 1, 2006
Absolute signal: A signal whose "stop" indication means "stop and stay." Usually identified by the absence of a number plate, but may also have a plate displaying the letter "A."

Automatic Block System (ABS): A series of consecutive blocks governed by block signals, cab signals, or both, actuated by a train or engine, or by certain conditions affecting the use of a block (i.e., an open switch or a broken rail).

Absolute-Permissive Block system (APB): An ABS system for single track railroads, configured to automatically provide absolute signal protection between opposing trains on single track and at passing sidings, but allow following trains to proceed governed by permissive signals.

Approach signal: A fixed signal used in connection with one or more other signals to govern the approach to the other signal or signals. (Also called a "distant signal.")

Block: A length of track of defined limits, with block signals or cab signals, or both, to govern its use by trains and engines. (Block lengths vary depending on desired operating speeds and other factors governing the trains' stopping distance. Typically they range from a half-mile to two miles long.)

Block signal: A fixed signal at the entrance of a block to govern trains and engines entering and using that block.

Cab signal: A signal located in the engineman's cab or compartment indicating a condition affecting the movement of a train or engine and used in conjunction with interlocking signals and in conjunction with or instead of block signals.

Centralized Traffic Control (CTC): A system under which train or engine movements are authorized by block signals whose indications supersede the superiority of trains for both opposing and following movements on the same track.

Current of traffic: The movement of trains on a main track in one direction specified by the rules.

Dwarf signal: A low home signal.

Fixed signal: A signal of fixed location indicating a condition affecting the movement of a train or engine. (This definition includes such signals as switch, train order, block, and interlocking types, as well as stop signs, slow signs, yard limit signs, and other permanently installed indications.)

Grade signal: A permissive signal used along a steep climb and identified by both a number plate and a plate with the letter "G." The governing rule is usually that a full-tonnage train climbing the grade may pass a grade signal indicating stop without stopping. Grade signals are used to keep heavy trains moving under conditions where the stopping distance is greatly reduced by the hill and restarting would be difficult.

Home signal: A fixed signal at the entrance of a route or block to govern trains or engines entering and using that route or block.

Interlocking: An arrangement of signals and turnouts with their controls so interconnected as to prevent conflicting movements through any combination of tracks such as junctions, crossings, and crossovers. May be operated manually or automatically, and also by remote control.

Interlocking signals: The fixed signals of an interlocking.

Manual block system: A block or series of consecutive blocks governed by block signals operated manually, upon information transmitted by telegraph, telephone, or other means of communication.

Medium speed: A speed not exceeding 30 mph.

Permissive signal: A signal whose "stop" indication means "stop and proceed at restricted speed." Usually identified by a number plate, some permissive signals also have a plate with the letter "P," indicating that a train may pass the signal indicating stop without stopping but at restricted speed.

Restricted speed: A speed allowing a train or engine to stop short of a train, obstruction, or anything that may require the speed of a train or engine to be reduced (usually no faster than 15 mph).

Signal aspect: The appearance of a fixed signal conveying an indication as viewed from the direction of an approaching train, or the appearance of a cab signal conveying an indication as viewed by an observer in the cab.

Signal indication: The information conveyed by a signal aspect. (A yellow light displayed on a signal would be its aspect; "approach" would be its indication.)

Track circuit: An insulated section of track with (in simplest form) a battery connected to the rails at one end and a relay connected at the other. The relay is normally held closed by the current flowing through the rails. When the rails are "shunted," connected together, by the wheels of a car or locomotive, the relay opens to indicate that the track section is occupied.
SEARCH SITE
Subscriber Only Content
Subscriber Only Content
This icon denotes premium subscriber content.   Learn more »